El talento y las capacidades de MEVA se reflejan en obras de diferentes tipos, formas, tamaños y alturas por todo el mundo. Obras exitosas que satisfacen a los contratistas son la mejor recompensa para el trabajo que hacemos día a día. Tales obras muestran la buena cooperación y la capacidad de nuestros programas de sistemas, servicios y tecnología en las manos de nuestros ingenieros y técnicos calificados. Mire algunas de nuestras obras de referencias y convénzase.
La tarea es reforzar los pilares de sección 60 x 60 cm (2 x 2 pies) convirtiéndolos en columnas de 1,10 m (3.6 pies) de diámetro para una presa subterránea de almacenamiento de aguas pluviales en Berna.
Obra grande en Ratisbona: los trabajos de construcción avanzan a toda marcha bajo la dirección de la Oficina Estatal de Obras y Construcciones.
El St. Jakobshalle, inaugurado en el año 1975, brinda una superficie de 22.000 m² (236.806 pies2) para eventos deportivos, musicales y empresariales.
El metro ligero de Karlsruhe en el suroeste de Alemania conecta las zonas interurbanas con el centro de la ciudad.
¡Más rápido, más alto, más eficaz! En lo que fuera la sede de la entonces fábrica de papel Attisholz, en la región norte de Suiza, se viene construyendo una nueva planta biofarmacéutica para el consorcio biotecnológico estadounidense Biogen.
Gracias al nuevo Pabellón 10, la nueva Feria de Stuttgart amplía su superficie de exposición de 14.600 m² a 120.000 m² (de 157.153 a 1.291.669 pies2).
En la antigua presa de la periferia berlinesa se viene construyendo un Indoor Skydiving Center, en donde se puede hacer realidad el sueño de volar flotando en el aire suspendido por una corriente de aire generada artificialmente.
En el borde interior de la mesa habían 5 cm que no estaban cubiertos con cara de contacto. De este modo se logró sin mucho esfuerzo la transición al encofrado para losas MevaFlex en el interior de la torre.
Construcción de supermercado y complejo residencial a cargo de la constructora Streib sirve de obra referencial para el American Concrete Institute
Construcción de 74 apartamentos en casas de 8 pisos en los terrenos de las que fueran las Chelsea Barracks con MEVA MAC y encofrado de muros AluStar
25.000 m² de losas en concreto en obra: el sistema de encofrado para losas MevaDec fue el elegido por su flexibilidad, rapidez de montaje y ahorro de mano de obra
"Se pudo lograr únicamente con la planificación tridimensional, la estrecha cooperación y gracias a la flexibilidad de los especialistas de MEVA", subraya el capataz de obra Matthias Unglert, refiriéndose a los pilares de apoyo.
To achieve the architect’s idea of architectural concrete in the staircase, MEVA engineers developed a special formwork design with the all-plasticfacing alkus.
La constructora Marti encofra los muros de contención, los muros del portal y los soportes del puente con MEVA Mammut 350 y el marco soporte STB 450.
Con el encofrado de muros Mammut 350 de MEVA se construyó en el centro de la ciudad un muro inclinado con alturas de hasta 7,45 m y concreto arquitectónico.
One challenge was pouring hundreds of columns with large mushroom-shaped column heads.
Construction of 4 city condominiums and one city villa with parking garage and pool on the banks of the river Rhine
The tower is being built with the hydraulic automatic climbing system MAC, MEVA Mammut 350 and MGC.
The prestigious Battersea development project in London relies on MEVA formwork technology, including the guided climbing system MGC, pre-bent all-pplastic alkus sheets on the Rundfix circular formwork and the circular formwork Radius to deliver the superior concrete finish required by the architects.
MEVA formwork Mammut 350, KAB, KLK and Triplex heavy-duty braces on this giant construction site in Switzerland
They chose MEVA for all concrete works.
The MevaDec slab formwork system covers all of the most important slab forming methods.
MEVA AluStar panels are on stage to shape Europe’s largest sailing pool directly in front of the original racing yacht Alinghi SUI 100, which was the first European boat ever to win the coveted America Cup.
They used heavy-duty Mammut wall formwork, MEVA KLK 230 climbing formwork, Co-Planar and MEP falsework plus Soliders, Super A-Beams and support frames STB 450.
The new 11-level car park at Salzburg’s State Hospital has no ramps to connect the levels with each other. The trick is that the entire parking level is inclined in both directions, with 14 inclinations each per level. The MevaDec slab formwork is being used to pour them without crane. The concrete finish remains as is.
6.50 m high, 12 m long walls formed with Mammut 350 and just one extension (3 and 3.50 m)
Large areas poured with heavyduty Mammut 350 formwork.
The Mammut 350 fresh concrete load capacity of 100 kN/m² made it possible to pour at any speed up to a wall height of 4 m.
Contractor Kurt Motz rented 520 m² of the Mammut 350 wall formwork to pour the building and retaining walls and columns.
The tower is climbing with MEVA’s automatic hydraulic climbing system MAC.
The concrete furniture is poured with the all-plastic facing used in all MEVA products since 2000.
Contractor Marti from Zurich, Zwitzerland uses MEVA wall formwork Mammut 350 because of its high concrete load capacity of 100 kN/m². It allows free pour speeds up to 4 m without taking concrete type of ambient temperatures into account.
A tough challenge for the MEVA engineers, who solved it using the Support frame STB 450 with extensions.
The bridge piers are up to 37 m high and have identical cross sections of 5.10 by 2.40 metres. The piers were poured using MEVA Mammut wall formwork.
17,000 m² of slabs in the lower levels were formed using an inventory of only 1,200 m² of the slab System MevaDec.
The boxout construction was attached to MEVA‘s StarTec formwork that on this site was used for over 2 years to pour the many walls of the complex.
Water Power Station “Illspitz”being built where the river Ill flows into the Rhine
MEVA climbing technolgy MAC and MGS are safety and efficiency solutions - as shown on the Hotel One site in Manila, Philippines
In order to waterproof the complete concrete structure along the Danube, concrete was poured entirely without any ties. The wall, 4.5 m high and 1 m wide, was poured usind single-sided support frames and brackets on both sides.
Logistische Herausforderung beim Neubau der Rathaus-Galerie in Hagens Innenstadt mit Tiefgarage, Bau und Abriss laufen parallel, Baumaterial und -gerät wird über eine einzige Rampe angefahren, Innenstadtbetrieb bleibt unberührt, auch dank MEVA reibungsloser Baufortschritt und hohe Qualitätsstandards gewährleistet.
The first and second pours used 3 m Mammut panels outside and 2.50 m high panels on the inside without compensation areas and without vertical joint imprint.
MEVA‘s Mammut 350 wall panels with the all-plactis facing alkus were mounted on foldable KAB working scaffolds that served as clim -bing units.
AluFix covers the slab formwork with the same panels used for the walls by using props with special prop heads.
The light-weight AluStar was up with only seven flights.
MEVA’s flagship product Mammut was flexible enough to offer solutions for the construction of the retaining walls.
Mammut 350 panels 250/100 cm panels were employed to achieve the required joint pattern imprint.
MEVA formwork technology helps build modern homes for Iran’s middle class and is used at large scale
MevaFlex and MEP props were also used to support the balconies. The slabs were cast using the MevaDec slab formwork.
MEVA formwork had to master exceptional concrete pressures during the pours.
The high walls of the new Novartis production facilities are poured using the Mammut 350 wall formwork.
The carriage was completely pre-assembled at the MEVA plant in Haiterbach and moved to the site on a heavy-duty low platform trailer.
Bridge construction with MEVA formwork systems: EcoAs, Mammut, KLK 230, and shoring system MEP.
The MEVA engineers were challenged to provide a static concept, starting with a cost-effective method of pouring the floating ceiling for the conference room.
The Mammut 350 has a concrete load capacity of 100 kN/m², permitting very fast concrete pours of up to 4 m in an hour.
Walls and foundations were poured using the strongest available wall formwork – the Mammut 350 with a load capacity of 100 kN/m².
The entries of several tunnels were poured using a modular formwork solution that MEVA designed and built for fast and multiple use in the mountainous terrain
The tower is being climbed using MEVA‘s automatic hydraulic System MAC. With its completely closed platform it provides a safe working environment even at great heights.
Mass house building: A new method using MEVA’s wall formwork AluFix saves time and money.
The all-plastic, 100 % wood-free facing alkus is the only formwork facing that can be welded to form large forming areas. The roof of this bus terminal in Merseburg, Germany, was poured without a single seam or joint, in Aalborg White cement.
Heinrich-Braun Clinic in Zwickau, Germany: 4-storey building erected using Mammut 350 wall formwork from rental fleet. Excellent, smooth concrete finish achieved with a symmetrical tie hole and joint pattern
MEVA KHK in Dubai were consulted to design and provide a comprehensive formwork solution for the island´s large-scale infrastructure projects.
MEVA Imperial and MevaDec formwork for a Courthouse in Ontario, Canada . Impressed by how quickly the panels go together, the light-weight clamps and the high-quality concrete finish.
The question was: How to “build” the required working platform 40 metres over ground if standard solutions cannot work? The answer is: Use STB 300 support frames and attach them horizontally to the tower.
Designs by esteemed architects from Europe and Japan were selected for the six new buildings on the campus and four of them are erected using MEVA formwork and formwork solutions.
The MEVA Guided Screens protection system MGS encloses complete floors protecting workers and equipment against wind and weather. Together with other MEVA systems, MGS is in use on an office tower that is being built in a mixed residential and office area outside Zurich.
The MEVA support frames are mainly – but not only – used to support single-sided wall formwork when, for example, pouring against an existing structure.
The MEVA shoring tower is easy and fast to lift and relocate by crane and saved much time.
Contractor Maïa Sonnier S.A. used different MEVA formwork systems and solutions to efficiently handle the various forming challenges when building the tunnel and bridges required for the inner-city rail link in populated area.
MEVA’s slab formwork system MevaDec and the girder formwork MevaFlex are used to pour the slabs of three office towers, Doha, Qatar.
All cycles over the starter were climbed with MEVA’s climbing formwork KLK 230.
Formwork for slabs, columns and walls was supplied by local MEVA distributor Alzner Baumaschinen to contractor Kreuzberger Bau GmbH.
The architects of the new library in the German town of Rutesheim stipulated highest demands on the concrete finish. The result was achieved with every pour of 3.46 - formed using the Mammut 350 wall formwork wihout extensions and without horizontal joint. The symmetrical tie-hole and joint pattern was approved by the architects.
MEVA was chosen to provide the forming for the 1st Nuclear project built in the United States in over 20 years.
Pouring concrete against rock: single-sided formwork solution from MEVA wins on technical counts.
The formwork solutions for foundations, beams, cores, walls, slabs and columns were designed and provided by MEVA KHK.
MEVA Engineers are known for their creativity in combining standard formwork with specially designed forms to achieve economically and technically viable solutions.
The engineers consulted MEVA´s formwork expertise because the expectations on concrete finish are very high. MEVA suggested using the unique shoring tower SPACE.
Planning, Formwork and Site Management: All Done and Delivered by MEVA
In 2000, MEVA was the first formwork manufacturer to use the pioneering alkus all-plastic forming face. While until recently not widely known in Ireland, alkus was welcome by Ascon and widely used together with the wall formwork Mammut at Ballymore Eustace.
MEVA wall formwork Mammut was chosen because of its load capacity of 100 k/N/m².
MEVA formwork and climbing systems are used for all on-site concrete works – including cores, slabs and walls – using cutting-edge technology in order to deliver a quality product on time, safely and efficiently.
One Rockwell is currently the largest MevaDec site on the Philippines. It is the safe and simple solution in slab forming, using the same parts and easy assembly. Its flexibility allows all slab layouts to be formed with a minimum of compensation areas.
The leading Norwegian concrete contractor BundeBygg AS, chose MEVA for all concrete works, including cores, elevator and staircase shafts, inside and outside walls, columns and slabs.
The high daytime temperatures required adding a retarder to the concrete, which resulted in the final setting occuring only after 15 hours. Nevertheless, the Mammut 350 has sufficient reserves to cope with load peaks of 100 kN/m².
The MevaDec slab formwork system achieved a record-breaking 154 levels and 224,808 m² without a single re-facing and without a single delay.
A simple, sophisticated design featuring few components and time-saving details distinguishes the MEP Shoring System, which consists of only three parts and, yet, is versatilely applicable: as single prop, slab table or shoring structure.
Mirax Tower Federazija with 440 m Height in Moscow with MEVA Formwork-Systems Mammut and all-plastic facing alkus.
MEVA formwork on biggest German construction site.
Railway Line between St. Pölten and Vienna: A new regional railway concourse for which the architects intended unique concrete geometries and special finishes
Perfect concrete finish with Mammut 350.
Mammut wall formwork and pre-bent alkus plastic sheets are used to form the wineglass-shaped bridge piers for a motorway crossover
Flexible forming with MevaDec and alkus.
An extraordinary projection tower in the newly built headquarter of a German publishing house challenged the architects as well as the contractor and MEVA as the formwork supplier.